I tie a slip knot. That is stupidly easy to do/undo, but apparently I am hated for it.
She/They
I tie a slip knot. That is stupidly easy to do/undo, but apparently I am hated for it.
No idea about which specific type of business it is, but keeping that history long term can have some benefits, especially to outside people. Some government agencies require companies to keep records for a certain number of years. It could also help out in legal investigations many years in the future and show any auditors you keep good records. From a historical perspective, it can be matched to census, birth, and death certificates. A lot of generational history gets lost.
Companies also just hoard data. Never know what will be useful later. shrug
Me too! I have used it for a couple other non-rpi devices in the past as well. It is super simple and works on my Mac. I haven’t even looked at other utilities in years.
That was the best day ever when it went down a few years ago while I was doing an install of an Amazon site. They have some “test” software that we have to run to validate the system and it was completely down. Still got some things done that day, but it was utterly hilarious to watch all of the Amazon personnel run around in a panic for a few hours. Fucking Prime trucks stuck on the side of the road with no instructions on what to do next. Utterly precious.
Everything runs 24/7, but now I am thinking about theoretical power saving modes. Besides any built in power saving whatever (a little clueless), you could always throttle the CPU more. Not sure if it would be worth it without testing with a power meter.
I attempted a maiden less run, and it made the game world a lot more enjoyable. Even on a normal playthrough I forget about Torrent half the time. I like running around exploring. I suck at fighting on a mount anyways. I rarely remembered to ride a horse in Breath of the Wild too.
I at least got one of those little cheap half size ironing boards that I can hide by the dryer. I iron special occasion clothes and that one silk shirt I love to straighten the button strip whatever if it is egregious… Otherwise it sits unused 99.5% of the year.
I know right? I have seen seen vision systems do some impressive things, but they are carefully calibrated to work in a specific way under certain conditions. Some of the ones my company works with get fed CAD in real time so the robot knows what to look for.
Sorry, didn’t make it home until today and not sure if you get notifications on edits. You will need a monitor and keyboard hooked up to your server as you will not have ssh access until the network config is “fixed”. I would do the below with the GPU removed, so you know 100% that your networking config is correct before mucking about further.
Add a /etc/systemd/network/99-default.link
with the below contents.
# SPDX-License-Identifier: MIT-0
#
# This config file is installed as part of systemd.
# It may be freely copied and edited (following the MIT No Attribution license).
#
# To make local modifications, one of the following methods may be used:
# 1. add a drop-in file that extends this file by creating the
# /etc/systemd/network/99-default.link.d/ directory and creating a
# new .conf file there.
# 2. copy this file into /etc/systemd/network or one of the other paths checked
# by systemd-udevd and edit it there.
# This file should not be edited in place, because it'll be overwritten on upgrades.
[Match]
OriginalName=*
[Link]
NamePolicy=mac
MACAddressPolicy=persistent
I forget if you have to reboot, but I am going to assume so. At this point, you can get the new name of your nic card and fix your network config.
ip link
should list all of your nic devices, both real and virtual. Here is how mine looks like for reference, with the MAC obfuscated:1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enxAABBCCDDEEFF: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master vmbr0 state UP mode DEFAULT group default qlen 1000
link/ether AA:BB:CC:DD:EE:FF brd ff:ff:ff:ff:ff:ff
3: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether AA:BB:CC:DD:EE:FF brd ff:ff:ff:ff:ff:ff
You will need to edit your /etc/network/interfaces
file so the correct card is used.
/etc/network/interfaces
, just in case you mess something up.sudo vim /etc/network/interfaces
(or whatever text editor makes you happy)
It will need to look something like below. I have to have DHCP turned on for mine, so your config likely uses static. Really all you need to do is change wherever it says enp yada yada to the enxAABBCCDDEEFF
you identified above. source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
iface enxAABBCCDDEEFF inet manual
auto vmbr0
iface vmbr0 inet dhcp
#iface vmbr0 inet static
#address 192.168.5.100/20
#gateway 192.168.0.1
bridge-ports enxAABBCCDDEEFF
bridge-stp off
bridge-fd 0
sudo systemctl restart networking.service
Hopefully at this point you have nework access again. Check the below, do some ping tests, and if it doesn’t work, double check that you edited the interfaces file correctly.
sudo systemctl status networking.service
will show you if anything went wrong and hopefully show that everything is working correctlyip -br addr show
should show that the interface is up now.lo UNKNOWN 127.0.0.1/8 ::1/128
enxAABBCCDDEEFF UP
vmbr0 UP 192.168.5.100/20
At this point, if all is well, I would reboot anyways, just to make sure. If you add any GPUs, sata drives, other PCI device, disable/enable wifi/bt in the BIOS, or anything else that changes the PCI numbering, you don’t have to worry about your NIC changing.
I am not at home, but what I did was change the 99-default.link file. I found this from the two pages below. https://wiki.debian.org/NetworkInterfaceNames#CUSTOM_SCHEMES_USING_.LINK_FILES https://wiki.debian.org/NetworkInterfaceNames
Basically, by doing this, your nic cards will be forcibly named using the mac address:
#/etc/systemd/network/99-default.link
[Match]
OriginalName=*
[Link]
NamePolicy=mac
MACAddressPolicy=persistent
Afterwards, you will need to reboot and then update your network config file to use the correct names. I don’t ever change the network config with the GUI in proxmox as it has wrecked it too many times. I will update this reply again later with some more information on what to do.
I changed my settings to name nic cards by mac address instead of the enumeration as I got sick of the name changing when I would add/remove pci devices.
Thank you. I admit I don’t use Firefox right now due to issues I ran in to during my trial run earlier this year. Once the battery drain issues are fixed on the Android client I can at least switch back to it on my phone.
My company surprised me last week as we did an install and things didn’t work right in Firefox for the customer. My boss and the team are committed to fixing it and doing better on browser testing. There was not a moment of hesitation on this decision. We of course told them to use Edge, Safari, or Chrome in the meantime, but by no means are we throwing it on the bottom of the “fix” pile. Team is almost done and ready to send to QA. Super proud.
I lucked out. Success at last! Now I can continue to code furiously doing things I know how to do.
Been there. Done that. FML on searching for programming help some days. Versioning is a nightmare as the way you “used” to do things is no longer relevant and the rest of the results are some asshole saying it is a duplicate question that was answered 10 years ago…that is no longer fucking relevant!
Sorry. Yesterday sucked. I hope today is less frustration and more things working like they are supposed to.
Like other posts, Factorio. You will lose sleep. Set timers…
Proton and Vulkan make most things easy-ish if you are using Steam. Note that there is a little properties button on the game page that you probably need to use to force it to use Proton so it will install. Proton DB is your friend. Lutris + Wine is pretty good too. Proton is just Wine with enhancements.
You may find Helldivers a lot of fun too, especially if you can play with friends. It is suitably ridiculous in the best way and is sort of human vs aliens/robots. All of the humans (us) play on co-op teams to bring Democracy to the universe. There is a game master from the company that makes it that is leading the war against us. Like I said, suitably ridiculous. Most of my friends are playing it nightly and it will be a big part of our LAN party this weekend.
I usually look at their GitHub or what have you to see if there are packages or instructions there. I have been able to solve most issues this way. Otherwise I see how much of a bitch it will be to compile from source. Depending what it is, I also check to see if there is a docker image instead.
No thanks. I will stick to my torx and hex, and they better be in metric.
Penta-lobes for some of the small electronics are funny I guess, but they don’t bother me as long as I have a bit for it. Main thing is to understand why some of these different shapes exist.
laughs in evil PLC programmer A little forces enabled, a change here, and maybe just move this wire over there while I am at it…
deleted by creator
🎶Little Mary Sunshine🎶
I love this movie. Reefer Madness.