This Eliezer Yudkowsky. He wrote a bunch of nerd fanfiction, and is apparently mostly famous for his takes on AI. He is a public figure.

If you’re really worried about power use, you could switch to an itx motherboard with an soc laptop chip in it.

Visually lossless means I couldn’t tell an image difference even when pixel peeping with imgsli. Good enough means I couldn’t tell a difference in video, but could occasionally see a compression artifact in imgsli.

The VMAF results are purely objective measurements. You can read more about it here; https://en.wikipedia.org/wiki/Video_Multimethod_Assessment_Fusion

I consider the ‘good enough’ level to be, if I didn’t pixel peep, I couldn’t tell the difference. The visually lossless levels were the first crf levels where I couldn’t tell a quality difference even when pixel peeping with imgsli. I also included VAMF results, which say that the quality loss levels are all the same at a pixel level.

I know that av1, x264, and x265 all have different ways of compressing video. Obviously, the whole point of this was to get a better idea of what that actually looked like. Everything on the visually lossless section is completely indistinguishable to my eyes, and everything on the good enough section has very minor bits of compression only noticed when i’m looking for it in a still image. This does not require the same codec to compare and contrast with.

Frankly, for anything other than real-time encoding, I don’t actually consider encoding time to be a huge deal. None of my encodes were slower than 3fps on my 5800x3d, which is plenty for running on my media server as overnight job. For real-time encoding, I would just grab a Intel Arc card, and redo the whole thing since the bitrates will be different anyways.

From my blogpost, i’m using the following command to encode the video;

ffmpeg -i source.2160p.mkv
-map 0:v:0
-map -0:a -map -0:s -map_metadata -1
-c:v libsvtav1
-preset 3
-vf scale=w=1920:-2
-crf 23
dest.1080p.av1.mkv

Sure, but that is a choice that couldn’t be made without first checking how much space is saved by switching codecs. This helps with making that decision, but i’m well aware it is only part of the information needed.

Stolen. Thank you.

I did try to format the table here better. I used code blocks the first time, and it ended up being even uglier. After about four edit attempts i kinda just gave up. Tables don’t seem to exist as far as I can tell either.

Your experience with x264 just about matches up with mine. As long as I don’t pixel peep, crf 24 does a pretty great job of conveying the information. It also does a pretty great job of working with just about everything compatibility-wise. I don’t expect it to go away any time soon specifically because of that.

AV1 is super neat in that we can buy hardware accelerated encoding for it for really cheap using the Intel Arc video cards, and can be decoded by their latest CPU generation. It makes for a great choice for something like security camera footage where playback compatibility is good enough (you can play it in a modern pc), hardware encoding works with a 200$ card, and you save a lot of money using the video card instead of buying extra storage space.

I checked my discord, and i think this is a case of discords shitty ui, not changing privacy settings. Yes, my checkbox in that exact location was allowing other people to find based on phone number contamination. However, when i visited the privacy page that i did know existed, that permission was still turned off for me.

Looks like a 9mm round to me. Welcome to pound town, population: you.

Is it $60 or less? Everytime one of these alternative boards with an assload of more features pops up, nobody bothers to mention the price. Obviously we could spend more money to get more features, that’s what spending more money does. You can’t replace something without actually offering an alternative. The pi’s biggest selling point was that it was cheaper than a steak dinner. If you dont match or beat that, you aren’t actually competing with the pi.

Im sorry, but, for things like games, raid isn’t really going to give you a perceivable speed increase. Most games today get the most use from the random read, where raid does best is with things like sequencial writes (large movies, etc).

Raid0 will add to your throughput, but your seek times will still be the same regardless of how many drives you add to it.

Here in the us, a 2tb ssd is less than 50$. Im sorry its not the same where you are at.

I know the others suggest raid0, but since youre doing three drives im gonna suggest raid 5 instead. You don’t lose out on read performance compared to raid0, just write speeds. More importantly, one drive failing wont actually break anything.

Heck, that's practically the unofficial linux motto.

Meh, i hate the design too, but i can absolutely support someone looking into making their linux install more personal.

tucker and dale is a horrible choice for a luigi’s mansion kid

I can’t speak for the more modern cars, but my 2019 corolla had a cell phone connection which could be cut by pulling a single fuse. Idunno if it’s a universal name, but it was called the DCM module. The emergency button in the roof was wired through it, and so was one of the right speakers and the built-in microphone. None of them work with the fuse removed. I’ll route the speaker and mic wires around it at some point by going through the glove box, but it hasn’t been a priority for me.

https://www.toyotanation.com/threads/how-do-i-locate-the-dcm-telematics-unit-on-a-2020-corolla.1693507/#post-14400614

I’m happy i did that too. Apparently toyota is still leaking the location history of a bunch of their cars and i’d hate to see that get abused.